Key:lamp mount

lamp_mount
Description
Lamp holder of a street lamp Edit or translate this description.
Used on these elements
may be used on nodesshould not be used on waysshould not be used on areasshould not be used on relations
Requires
Useful combination
See also
Status: in use
More details at taginfo
Tools for this tag

Tagging

These apply to node nodes only.


=== lamp mount === lamp_mount=* is used describe how a highway=street_lamp is supported.

Key Value Element Comment Rendering Photo
lamp_mount angled_mast node A pole that starts out straight but then is angled. This might be to space off the lampshade from a building in case the pole is too close.
lamp_mount bent_mast node A pole that starts out straight but then bends to "reach" over the street. The lower straight part of the pole may help with vehicle clearance of the lamp.
lamp_mount high_mast node A tall pole (greater than 30m) with lighting mounted on a ring at the top. Typically found near motorway interchanges.
lamp_mount straight_mast node A pole with a light at the very top of the post.
lamp_mount suspended node The light is suspended over the street by a wire. In the case of an electric lamp, the wire may be the power source.
lamp_mount wall node The light is attached to a wall.

Possible tagging error

If you know places with this tag, verify if it could be tagged with another tag.
Automated edits are strongly discouraged unless you really know what you are doing!
  • lamp_mount=bent mast ‒ Tags should have an underscore instead of a space.
If you know places with this tag, verify if it could be tagged with another tag.
Automated edits are strongly discouraged unless you really know what you are doing!
This article is issued from Openstreetmap. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.