Questions tagged [fanout]

I have a small hobby project in which I want to include the Kingston EMMC04G-M657 eMMC chip. This chip comes in BGA packaging with 0.5mm pitch between balls. I want my board to be cheap, so I'm laying it out for a 4-layer JLBPCB PCB using their…

I need a clock fanout buffer to drive 3 components with same clock, and I have found this reference design but could not understand the reason of using the inverter in the middle. Can I directly connect the tcxo clock to fanout buffer?

I am designing high density board with high pins count BGA, and hundreds of decoupling capacitors, in that what are the recommendations for using blind vias for fanouts to connect power and GND planes. Should I use blind vias or regular vias to…

This is a drawing fragment of a unit that I have to extend a slave display from. simulate this circuit – Schematic created using CircuitLab Rough drawing of what I would like to add to expand this display to make it visable from 20 meters. With 10…