Using blind vias for fanouts in GND and power planes

Asked Aug 23 '23 at 17:04

Active Aug 23 '23 at 17:06

Viewed 22 times

I am designing high density board with high pins count BGA, and hundreds of decoupling capacitors, in that what are the recommendations for using blind vias for fanouts to connect power and GND planes. Should I use blind vias or regular vias to avoid EMI/EMC issues?

edited Aug 23 '23 at 17:06

JYelton

32,302
33
134
249

asked Aug 23 '23 at 17:04

Jweta

3

The chip vendor probably provides a recommended layout for their chip. Have you read it? – The Photon Aug 23 '23 at 17:27

Using blind vias for fanouts in GND and power planes

0 Answers0