0

This is a picture of my schematic and I want to ask what could be the reason why the ones below won't light up

1:enter image description here https://i.stack.imgur.com/REuys.png

Axxi
  • 1
  • 1
  • 1
    remove D1 to D8 from the circuit ... compare the connections to the two remaining LEDs – jsotola May 21 '23 at 04:02
  • The bottom LEDs have their anode going to a banana plug or something. It needs external connection via banana plug. Do you have that banana plug connection? Or do you expect the LEDs to light up without one? – Justme May 21 '23 at 06:59

1 Answers1

4

The GPIO pins for the lower LEDs are connected to GND.

PStechPaul
  • 7,195
  • 1
  • 7
  • 23