I'm putting together a PCB and I want to use single 8Gb (512*16) DDR3 chip (MT41K512M16HA) but the DDR3 address bank is less than the DDR3 chip.
Is it possible to use single 8Gb chip for this IC?
Asked
Active
Viewed 249 times
2
-
XC7A50T is an Artix-7 FPGA, not a Zynq part. Zynq parts all have a "Z" as the fourth character, e.g. "XC7Z035". – Sep 07 '17 at 18:16
-
sorry the part is XC7Z020-2CLG400I – Danesh_sa Sep 07 '17 at 21:21
-
see the parallela board they use a single ddr3 ic MT41K256M32SLD-125:E – kakeh Sep 24 '18 at 09:26