-1

For the 18V +/- NIMH battery pack (2 x 9V packs in series @ 200mAh) that I use to run my phono preamp, I need a simple trickle charge circuit. The LM317 IC seems to be the one that is used a lot. Does any one have a proven circuit that would work with a very low charging current of say around 20-30 mA?

Thanks

Hal24
  • 1

1 Answers1

0

I am no expert as I recently asked a similar question about a circuit I'm designing for an NiMH battery charger, but from the feedback I got, it would seem that a circuit with a current that low wouldn't need much protection. You can see the responses I got at Solar Cell - Preventing overcharge of an NiMH battery.

Community
  • 1
Jacob Riggs
  • 33
  • 1
  • 3